Our Point Level Controller is a cost-effective solution designed for detecting conductive liquids with various characteristics. Whether it’s low density, high viscosity, the presence of solid particles, or even the interface between non-conductive and conductive liquids, this controller excels.
It’s simplicity and versatility for efficient liquid level detection in diverse applications.
Applications
– Water
– Sludge coolant
– Milk
– Sulphuric acid
– Fruit juice
– Sump
– Effluents
– Reservoir Control
– Caustic
– Cooling Towers
– Phosphate
– Waste water & sewage treatment plants.
Bilge Level Switches, crucial for detecting liquid in hard-to-access areas such as dead spaces, voids, and sumps.
They provide early indication of rising liquid levels, highlighting potential leakage or flooding risks.
Applications
– Ship bilges and tanks
– Industrial sumps and tanks
– Indication Type
Rotating Flappers (Red / White)
Standard
Shuttle
Hermetically Sealed Flappers
Broad Indicators
Custom Color Flappers
Indicator Visibility upto 200 ft.
– Scale
Inches / Feet
Running Inches
Millimeters / Meters
Centimeters / Meters
Percent (5% increments)
Gallons
Liters
Indicator Visibility upto 100 ft.
Ranges up to 1400 bar I 20.000 psi
Portable and rugged
Stainless steel construction
Easy to use
Accuracy: 0,015% of reading
Includes
Certificate traceable to national and international standards
Set of adapters: 1h.”BSP, %”BSP %.”BSP, Ys”BSP
Nuto H32 DWT- oil (1/2 ltr.)
Weights
All stainless steel
Deliverable in kg, bar, psi, kgf/cm2, kPa, MPa and many other units Protected by a stainless steel carrying box
Options
accuracy 0,015% Square adapter 1h.”BSP- %”BSP left male Connecting stand Dirt/moisture trap Aluminium transport box BSP and NPT connection sets
Portable Calibration Furnace
Temperature Range: 150°C to 1200°C
Cools from 1200°C to 800°C: in 50 minutes*
1200°C to 200°C: in 180 minutes*
Heating Rate: 25°C/minute
Calibration volume: 33.5mm diameter by 130mm deep
Standard Insert: 4 pockets, 8.0mm diameter by 80mm deep
Indicator units: °C, °F, K
Computer Interface: Included with Software
Voltage: 100 to 120V (50 / 60 Hz) or 200 to 240V (50 / 60 Hz)
Power: 800 Watts
Dry Block Calibrator
Features:
Wide operating range to 660°C
Fast Response
Calibrate Whole Measurement Loop
The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package ideal for the calibration of thermocouples and platinum resistance thermometers. It has been designed for fast heating and cooling for convenient field use. For flexibility surface sensor and infrared thermometer accessories can be added.
ISOCAL – 6 Range
Features:
Multi Function: Six Modes including Dry Block
and Liquid Bath
Fast Response 35mm x 160mm Calibration Volume
Calibrate Whole Measurement Loop
These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.
Dry Block Calibrator
Temperature Range: 35°C to 650°C
Computer Interface: Included with Software
Cools from 650°C to 150°C: in 60 minutes
Heats from 30°C to 650°C :in 20 minutes
Calibration volume: 35mm diameter by 148mm deep
Standard Insert: 6 pockets, 2 x 4.5mm, 2 x 6.4mm, 1 x 8.0mm, 1 x 9.5mm diameter, all 140mm deep
Display Resolution: 0.01 to 99.99 0.1 100.0 to 650.0
Indicator units: °C, °F, K
Power: 100 to 120V (50 / 60 Hz) or 200 to 240V (50 / 60 Hz) 1000 Watts
Specifications
±0.25% Test Gauge Accuracy
316L Stainless Steel Wetted Parts
NEMA 4X
Capture Minimum and Maximum Readings
Push Button Zero
Selectable Engineering Units
Selectable Auto Shutoff Times
Specifications
Vacuum 28”Hg to pressure 600psi (combination pump)
Compatible with all gauges and calibrators
Connections (2 ports) 1/4 inch and 1/8”inch
NPT/BSP Weight 2 lbs
Made in the USA