Our Products

Ranges up to 1400 bar I 20.000 psi
Portable and rugged
Stainless steel construction
Easy to use

Accuracy: 0,015% of reading

Includes

Certificate traceable to national and international standards
Set of adapters: 1h.”BSP, %”BSP %.”BSP, Ys”BSP
Nuto H32 DWT- oil (1/2 ltr.)

Weights

All stainless steel
Deliverable in kg, bar, psi, kgf/cm2, kPa, MPa and many other units Protected by a stainless steel carrying box

Options

accuracy 0,015% Square adapter 1h.”BSP- %”BSP left male Connecting stand Dirt/moisture trap Aluminium transport box BSP and NPT connection sets

Portable Calibration Furnace

Temperature Range: 150°C to 1200°C
Cools from 1200°C to 800°C: in 50 minutes*
1200°C to 200°C: in 180 minutes*
Heating Rate: 25°C/minute
Calibration volume: 33.5mm diameter by 130mm deep
Standard Insert: 4 pockets, 8.0mm diameter by 80mm deep
Indicator units: °C, °F, K
Computer Interface: Included with Software
Voltage: 100 to 120V (50 / 60 Hz) or 200 to 240V (50 / 60 Hz)
Power: 800 Watts

Dry Block Calibrator

Features:

Wide operating range to 660°C
Fast Response
Calibrate Whole Measurement Loop

The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package ideal for the calibration of thermocouples and platinum resistance thermometers. It has been designed for fast heating and cooling for convenient field use. For flexibility surface sensor and infrared thermometer accessories can be added.

ISOCAL – 6 Range

Features:

Multi Function: Six Modes including Dry Block
and Liquid Bath
Fast Response 35mm x 160mm Calibration Volume
Calibrate Whole Measurement Loop

These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.

Dry Block Calibrator

Temperature Range: 35°C to 650°C
Computer Interface: Included with Software
Cools from 650°C to 150°C: in 60 minutes
Heats from 30°C to 650°C :in 20 minutes
Calibration volume: 35mm diameter by 148mm deep
Standard Insert: 6 pockets, 2 x 4.5mm, 2 x 6.4mm, 1 x 8.0mm, 1 x 9.5mm diameter, all 140mm deep
Display Resolution: 0.01 to 99.99 0.1 100.0 to 650.0
Indicator units: °C, °F, K
Power: 100 to 120V (50 / 60 Hz) or 200 to 240V (50 / 60 Hz) 1000 Watts

Specifications

±0.25% Test Gauge Accuracy
316L Stainless Steel Wetted Parts
NEMA 4X
Capture Minimum and Maximum Readings
Push Button Zero
Selectable Engineering Units
Selectable Auto Shutoff Times

Specifications

Vacuum 28”Hg to pressure 600psi (combination pump)
Compatible with all gauges and calibrators
Connections (2 ports) 1/4 inch and 1/8”inch
NPT/BSP Weight 2 lbs
Made in the USA

Specifications

MV-100 0-28”Hg (depends on barometric pressure)
MP-100 0 to 100 psi (including and not limited to an inch of water)
Connections (2 ports) 1/8 inch NPT
Weight 1.5lbs
2ft hose and 1/4 inch fitting
Made in the USA

Specifications

0 – 10,000 psi (700 Bar) Compatible with most
hydraulic fluids, oils and water Connections (2 ports)
1/4 inch NPT / BSP Weight 3lbs Made in the USA

Specifications

Operating Temperature Range : -20 to 60°C (-5 to 140°F)
Storage Temperature Range : -30 to 60°C (-22 to 140°F)
Relative Humidity Range :
10% ≤RH≤90% (0 to 35°C), Non-condensing
10% ≤RH≤70% (35 to 60°C), Non-condensing
Size : L=5.63 x W=3.00 x H=1.60 inches
Weight : 12.1 ounces (including boot & batteries)
Batteries : Four “AA” Alkaline 1.5V (Duracell MN1500 or equivalent) Optional 120 VAC 50