3117
Converts bipolar voltage or current process signals to unipolar output signals
Multiple ranges are selectable via DIP-switch
High 0.05% accuracy in all available
ranges
3109
Isolation and conversion of standard active/ passive current and voltage process signals
Splitter function: 1 in – 2 out, each individually confi gurable
Easy and fast DIP-switch programming for input and individual output set-up
Loop supply > 17 V for powering 2-wire transmitters
3108
Isolation and signal repeating of 0-20 mA and 4-20 mA current signals
Provides simple splitter function: 1 in – 2 out
High accuracy < ±0.05% of span
Fast response time: < 7 ms
3105
Isolation and conversion of standard analog process signals
Ultra low cost
Fast response time: < 7 ms
DIP-switch confi gured
3104
Isolation and conversion of standard active/ passive current and voltage process signals
0.05% accuracy in all available DIP- switch selectable ranges
Loop supply > 17 V for powering 2-wire transmitters
3103
Isolation and 1:1 conversion of standard current signals
Simple and cost eff ective
Fast response time: < 7 ms
Conversion range: 0-20 mA
3337
Converts Pt100, TC J and K temperature sensors to an isolated passive current output
Loop powered 4-20 mA output with HART protocol
More pre-calibrated temperature ranges are selectable
Programmed by DIP-switches or by standard HART interface
3333
Converts a standard 2, 3 or 4-wire Pt100 temperature sensor
Provides a passive analog current output signal
Flexibly loop powered by 3.3-35 VDC
Wide ambient temperature range of -25 to +70°C
3331
Converts Pt100, TC J and K temperature sensors to an isolated passive 4-20 mA current output
Greater than 0.1°C or 0.05% accuracy in all available ranges
Flexibly loop powered by 5.5-35 VDC
High galvanic isolation of 2.5 kVAC
3114
Converts RTD, TC, Ohm, potentiometer, mA or voltage input signals
All operational parameters can be modified to suit almost any signal conversion
High performance, fl exible design
Programming via 4501 display and Conf gmate 4590