3113
Converts Pt100, TC J and K temperature sensors to an isolated active analog current and HART signal output
Multiple pre-calibrated temperature ranges selectable
Programmed by DIP-switches or by standard HART interface
3112
Converts Pt100 temperature sensors to voltage or current outputs
Excellent accuracy, better than 0.1°C or 0.05% in all available ranges
Pre-calibrated temperature ranges selectable via DIP-switches
Selectable < 30 ms / 300 ms response time
High galvanic isolation of 2.5 kVAC
3111
Converts TC J and K temperature sensors to voltage or current outputs
Top performance in harsh EMC environments
Meets the NAMUR NE21 recommendations
Greater than 0.5°C or 0.05% accuracy in all available ranges
High galvanic isolation of 2.5 kVAC
3102
Converts Pt100 temperature sensors to voltage or current outputs
Over 1000 pre-calibrated temperature ranges selectable
High accuracy, better than 0.2°C or 0.1% in all available ranges
Easily confi gurable via DIP-switches
3101
Converts TC J and K temperature sensors to voltage or current outputs
High accuracy, better than 1°C or 0.1% in all available ranges
Selectable < 30 ms / 300 ms response time
Excellent EMC performance and 50/60 Hz noise suppression
5420B
2 channels
5-port 3.75 kVAC galvanic isolation
Output voltage > 18 V to I.S. area
Active current loop detection
Universal supply by AC or DC
5223B
Pulse calculator / frequency generator
Galvanic isolation
ATEX I.S. version
Analog current and voltage output
PNP / NPN output, optional relays
Universal supply
5203B
1- or 2-channel version
Solenoid driver for I.S. area
3- / 5-port 3.75 kVAC galvanic isolation
Digitally controlled voltage supply for I.S. area
Universal supply by AC or DC
5202B
2 channels – 2 or 4 outputs
Dual output
5-port 3.75 kVAC galvanic isolation
Cable error detection
Universal supply by AC or DC
5131B
Input for RTD, TC, mV, linear resistance, mA, and V
3.75 kVAC galvanic isolation
4…20 mA loop output
1- and 2-channel versions
ATEX Ex / I.S. version
DIN rail mounting